Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Beverly?
Garage door repair in Beverly typically costs between $150 and $600, depending on what failed and which parts are involved. A snapped spring runs $180 – $340 for a single spring, while a dead opener or a door off its track usually lands at the lower end of that band. We give a written estimate before any work starts, and that written estimate sets the final price.
Garage door failures tend to announce themselves at the worst moment: a bang from the ceiling early in the morning, a door that stops halfway, an opener that hums but won’t move the door. If you’re there right now, call (888) 762-7611. We answer 24/7, and fast dispatch runs from 7am to 7pm.
Key Takeaways
- Typical garage door repair in Beverly: $150 – $600.
- Spring repair (one spring): $180 – $340. A matched pair costs about twice that, since both springs are normally replaced together.
- Opener repair: $120 – $320; full opener installation: $250 – $550.
- New door installation, if repair no longer makes sense: $700 – $2200.
- Estimates are free, and you get a written price before we touch the door.
Garage Door Repair Cost Breakdown (2026)
Here’s what the common jobs run in Beverly, quoted as typical estimated ranges. Actual numbers move with door size, brand, and how much surrounding hardware needs replacing at the same time.
| Repair or Service | Typical Estimated Cost |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Spring replacement (matched pair) | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a job toward the top of these ranges? Brand and door weight matter more than most homeowners expect. A heavier insulated Clopay or Amarr door loads its springs harder than a basic single-car Wayne Dalton, and the hardware that carries that load has to match. Opener work is similar: a modern LiftMaster or Chamberlain unit with Wi-Fi and battery backup has more inside it than a legacy Craftsman chain drive, and diagnosing it takes a different path. Older doors sometimes carry discontinued parts, which is where our parts supply matters, since we work with genuine components rather than adapting something that almost fits.
What keeps a job at the lower end is catching it early. A worn roller is $110 – $220. A bent track straightened before it drags the door panel out of alignment is $120 – $240. Wait on either one and you’re looking at panel replacement at $250 – $500. We’d rather tell you that plainly on the estimate than after the fact.
What Affects Garage Door Repair Pricing in Beverly
Two doors with the same symptom can price differently. These are the factors that move the number:
- Which component failed. A torsion spring under tension and a $12 roller are not the same job, and the price bands above reflect that spread. The most common failure by far is the spring, which is why it gets its own dedicated service rather than being folded into general repair.
- Brand and opener ecosystem. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and each has its own logic. A LiftMaster or Chamberlain/myQ opener pairs with an app and safety sensors that need to be checked as part of the diagnosis; a Genie or Craftsman unit from an older home follows different troubleshooting. Knowing the brand up front saves time on the estimate and often saves parts.
- Single or double car door. A wider, heavier door carries more spring tension and heavier-gauge hardware. Parts cost more and the labor changes with it.
- Whether it’s one spring or a pair. Springs are usually replaced as a matched set, because a new spring paired with an old one wears unevenly and the older one follows soon after. One spring is $180 – $340; a pair runs about twice that.
- Condition of the surrounding hardware. If the cable that snapped also chewed a drum, or the door came off the track and bent a hinge, those get added to the job. We list every one on the written estimate so nothing appears as a surprise line item later.
- Repair versus replace. A door that’s had three separate failures in a short stretch is often better replaced than patched again. New installation runs $700 – $2200, and it’s worth comparing honestly against another round of repair.
One factor that doesn’t change the price is when you call. A spring that snaps at 7am costs the same to fix as one that snaps at noon. The written estimate is the price.
Spring Repair: Why It Costs What It Costs
Springs are the most dangerous component in your garage door system, and we treat them differently for that reason. A torsion spring holds the full weight of the door under heavy tension. When it breaks, it releases that energy instantly. This is not a part to inspect up close, touch, or attempt to wind by hand. A trained technician uses the right winding bars, the right spring for the door’s weight, and the right safety procedure, and that training is what you’re paying for as much as the part.
Because spring repair is a named, dedicated service for us rather than an occasional job, our technicians read the failure quickly: the gap in the coil, the door that lifts a few inches and stops, the cable that’s gone slack as a result. Our technicians have up to 11 years of experience, all of it in garage doors. If your door has stopped and you suspect a spring, keep everyone clear of it and call (888) 762-7611. We answer 24/7.
Opener Repair or Replace: What’s the Smarter Spend?
When an opener fails, the repair-or-replace question comes down to age, brand, and what actually broke. A dead remote or a misaligned safety sensor is a small fix inside the $120 – $320 opener repair range. A burned-out motor on a unit that’s already old is a different conversation.
- Repair makes sense when the unit is otherwise sound and the fault is a sensor, a gear, a logic board, or a remote that won’t pair. Modern LiftMaster and Chamberlain openers have more electronics to go wrong, but most of it is serviceable.
- Replacement makes sense when the motor is failing, the unit is a legacy Genie or Craftsman that’s already had multiple repairs, or you want smart-home integration the old unit can’t offer. Opener installation is $250 – $550.
A worn opener on a heavy door is also worth pairing with a spring check, since the opener is designed to lift a balanced door, not to fight a failing spring. If it’s been straining, the opener is often the second casualty, not the first.
Can You Repair My Door the Same Day?
Often, yes. Same-day service is one of the reasons we keep genuine parts on hand: common springs, cables, rollers, and openers don’t need to be ordered in for most jobs. That’s the difference between a door back in service today and a door out of action for a week.
Here’s how a call usually goes. You describe the symptom, we ask the brand and roughly the door size, and we get a technician out on fast dispatch between 7am and 7pm. The technician diagnoses the door by brand, confirms the failure, and writes the estimate on the spot. You approve it, the work gets done, and the door goes back into service. Call (888) 762-7611 to get that started. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
How to Save on Garage Door Repair
There’s no clever trick to cheaper garage door work, but there are a few habits that keep money in your pocket:
- Fix the small thing first. Replace rollers at $110 – $220 before a worn roller drags the door and bends a track or a panel. The repair you avoid is the one that saves the most.
- Don’t run a door with a broken spring. If the opener keeps trying to lift a door the spring can no longer balance, you risk adding opener repair at $120 – $320 on top of the spring job.
- Get the written estimate before work starts. A clear line-item estimate tells you exactly what’s being replaced and why, so you can decide what to do now and what can wait.
- Ask whether a repair or a replacement is the better spend. On an older door with repeat failures, putting $600 of repairs into a door that’s ready to go can cost more than a new door installation at $700 – $2200. Ask, and we’ll give you a straight answer either way.
- Take the free estimate. There’s no charge to look, diagnose, and quote. Call (888) 762-7611.
When a Repair Isn’t Worth It
Sometimes the honest answer is that the door has reached the end. If a door has had several failures across springs, cables, and hardware in a short stretch, or if the panels themselves are failing, patch repairs start to cost more than they save. New door installation in Beverly runs $700 – $2200, and because we handle both repair and full installation, you don’t need a second contractor for the replacement.
What we won’t do is talk you into a replacement when a repair solves it. The written estimate lays out both paths when both are reasonable, and the decision is yours.
Parts, Brands, and Why It Matters for Your Price
We stock and supply genuine garage door parts, which does two things for your price. It removes the wait on common components, so a same-day repair is actually possible, and it means the part in your door matches the door’s design rather than being adapted to fit. On a heavy Clopay or Amarr door, or on a Raynor or Wayne Dalton system with its own hardware, that’s the difference between a repair that holds and one that comes back.
Brand fluency is a pricing advantage too. A technician who has to guess at an opener’s logic spends more time on the diagnosis, and time is cost. We work on eight of the most widely installed residential brands, so diagnosis usually starts from the brand’s known failure points instead of from scratch. That’s why we ask for the brand when you call. If you want the full picture of how we approach a repair before you book, start with our page on garage door repair.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Beverly?
Most garage door repairs in Beverly run $150 – $600. That covers everything from a $110 – $220 roller swap to a $180 – $340 spring repair, with panel work at $250 – $500. Your written estimate sets the final price. Call (888) 762-7611 for an exact quote; estimates are free.
Is it cheaper to repair or replace my garage door?
Repair usually wins if the door structure is sound: a spring, cable, roller, or opener fix stays within $110 – $550. Replacement makes more sense when the door has had repeat failures or failing panels, at $700 – $2200 for new installation. Our written estimate lays out both so you can compare. Call (888) 762-7611 to get one.
Why does spring repair cost more for a pair?
A pair costs about twice the single-spring range because both springs are normally replaced together. A spring job is $180 – $340 for one spring, and doing the pair at once prevents a second call when the older spring fails. Call (888) 762-7611 for a written estimate on your door.
Does the price change if I need it fixed today?
No. Same-day service doesn’t add to the price, and the estimate is set per job by the written quote. Call (888) 762-7611. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
How much does a new opener cost installed?
Opener installation runs $250 – $550, while repairing an existing unit is $120 – $320. Repair usually wins when the opener is otherwise sound; replacement wins when the motor is failing or you want smart-home integration. Call (888) 762-7611 for a free estimate.
Get a Written Estimate for Your Door
If your door is stuck, spring-broken, or just making a noise it didn’t make last month, don’t guess at the bill. Beverly Garage Door Repair Pros gives you a written estimate for the actual job on your actual door, and that written price is the price. We handle repair, opener work, parts, spring repair, and full installation, so you’re dealing with one specialist from first call to finished door.
Call (888) 762-7611 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Same-day service is often possible, and your door can be back in service today.
Written by the team at Beverly Garage Door Repair Pros.
Pricing reflects the Beverly market as of 2026. Beverly Garage Door Repair Pros offers free estimates – call (888) 762-7611.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Neil Vaughn"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Daniela Vargas"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Michael Parker