Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Beverly Homeowners
A door that won’t lift, binds halfway up, or has rusted through its bottom panels has stopped doing the one job you need from it. Replacing it is a planned project, not an overnight surprise, and the right time to start is before the door quits entirely. Our technicians have up to 11 years of experience working on residential doors across the eight brands that cover most homes in the area, from older Craftsman units to modern LiftMaster and Chamberlain smart systems. We measure, recommend, and quote in writing before anything is ordered, so the number you agree to is the number on the invoice. For repair calls on a door that’s already failing, we can often get a technician out the same day, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (888) 762-7611 to set up a free estimate.
What Our Garage Door Installation Service Includes
A full installation here means removing the old door and hardware where needed, setting the new door and track true, balancing the springs, and connecting or replacing the opener so the whole system runs as one unit. We handle the measurement, the order, and the install in one job. No second contractor, no handoff. Below is what each type of job actually involves.
New Door Installation
New door installation is a full replacement: the old door comes down, the track and springs are set for the new door’s weight, and the opener is matched to it. You need this when the door’s structure has failed, when panels are no longer made for your model, or when you’re changing size or material. We measure the opening ourselves rather than trusting a homeowner’s numbers, because a door ordered to the wrong size is a door that won’t close square. Once the door is up, we cycle it several times and check the balance and safety reverse before we call the job finished.

Single Car Door
A single car door covers a standard one-vehicle opening, usually eight to nine feet wide, and it’s the most common replacement in Beverly’s older two-car garages that were built with two separate bays. You need one when a single bay’s door has warped, dented, or lost its spring anchors and repairing it costs more than it’s worth. We match the new door’s weight to a properly rated torsion or extension spring setup, since a door that’s heavier than its springs were sized for will strain the opener and wear out fast. The result is a bay that opens smoothly on its own, without the drag you’ve been working around.

Double Car Door
A double car door spans a two-vehicle opening, typically sixteen feet, and it carries far more weight than a single door, which makes spring sizing and track alignment critical. You need this when a wide door sags in the middle, when the panels have separated, or when you’re consolidating two single bays into one wide opening. On a door this size, we check the header and the spring anchor points before ordering, because a wide door puts real load on the framing above it. We balance the door to open with hand pressure alone before the opener ever touches it.

Custom Garage Door
A custom door is built to a nonstandard width, height, or design, whether that’s a matched look for a home’s architecture or an opening that isn’t a stock size. You need one when a standard door won’t fit, when the garage shares a wall with a living space and needs insulation and a tighter seal, or when you want the door to match the house rather than just cover the hole. We take the measurements, walk through the material options, and quote the custom build before anything is ordered, so you know the lead time and the price up front. Custom work runs on a longer schedule than a stock door, and we say so honestly rather than promising a date we can’t hold.
Steel Doors
Steel doors are the most common residential choice: they’re strong for their weight, they hold paint well, and they suit most of the housing stock around Beverly. You need steel when you want a durable door that takes impact better than wood and needs less upkeep over the years. We check the gauge and insulation of the steel door against your opening and your opener’s capacity, because a heavier insulated steel door can overwhelm an opener that was sized for a thin one. If your current opener can’t handle the new door, we’ll tell you before the install, not after.
Wood Doors
Wood doors bring a warmth and character that steel and aluminum can’t match, and they suit the older homes and brick garages common in this part of the city. You need one when you want a door that can be stained, finished, or matched to the house, or when you’re replacing an original wood door that’s rotted at the bottom. Wood needs proper sealing and periodic refinishing to stand up to the freeze-thaw swings of a Chicago winter, and we’ll walk you through the finish and maintenance a wood door will need. We also confirm the spring and opener are rated for the door’s actual weight, since a solid wood door can be much heavier than the panel it replaced.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We work on Clopay doors often enough that we know where they wear first: the bottom section takes the weather, the hinges loosen with cycles, and the steel skins dent before the frame gives. Knowing a Clopay door’s construction means we can tell you whether a repair is worth doing or whether the door is past saving and a replacement is the honest answer. Amarr doors show up on a lot of newer builds, and we know their panel and hardware patterns well enough to match a new door to what’s already on the house without guesswork.
Wayne Dalton and Craftsman doors are common on older garages in the area, and both have quirks worth knowing before an install. Wayne Dalton’s TorqueMaster-style spring systems sit differently than a standard torsion setup, and Craftsman doors were often paired with Craftsman openers that need to be matched or replaced when the door changes weight. We work on all of these and can order what fits. Whether you have a Clopay, Amarr, Wayne Dalton, Craftsman, or any other make, we can help.
Signs You Need Garage Door Installation Right Now
Some failures are worth repairing. Others mean the door has reached the end of its life, and putting money into it just delays the replacement. Here’s how to tell the difference.
- The door is visibly sagging or bowed. A door that dips in the middle or doesn’t sit level when closed has likely lost structural integrity in its panels or frame. Once the door itself is warped, balancing it won’t fix it, and you’re looking at a replacement rather than an adjustment.
- Panels are rusted through or rotted at the bottom. Rust eating through the bottom section or soft, crumbling wood along the threshold means moisture has gotten into the door’s core. A rotted door loses strength fast and can’t be reliably repaired panel by panel once the damage is widespread.
- The track is bent beyond straightening. A track that’s been hit, or that’s bent from years of a misaligned door, throws the whole door off its path. If a technician can’t true it back to straight, the door needs a new setup, not another realignment.
- You’ve had repeated repair calls on the same door. When springs go, then rollers, then the opener, and then a hinge, the door is telling you its components are all wearing out together. At that point, replacement often costs less over the next few years than chasing one repair after another.
- The door is too heavy for its opener, or the opener can’t be matched. If your opener strains, reverses, or trips on a door that’s gained weight or been repaired repeatedly, the mismatch won’t resolve with tuning. A new door sized correctly for a properly rated opener solves it at the source.
Our Garage Door Installation Process – Step by Step
Installation is a measured, scheduled job, and we want you to know exactly what happens from the first call to the final cycle test. Here’s the sequence.
- 1
Free on-site measure and written estimate. We come out, measure the opening ourselves, and look at the existing door, track, springs, and opener. We walk you through the material options and the price range, then leave you with a written estimate that sets the final price. Nothing is ordered until you agree to it.
- 2
Ordering the door and confirming the timeline. Once you approve the estimate, we order the door to your exact size and specs. Stock sizes move faster than custom builds, and we tell you the lead time up front so there are no surprises about the date.
- 3
Removing the old door and checking the framing. On install day, the old door and hardware come down, and we check the header, the spring anchor points, and the track mounts. If something in the framing has shifted, we address it before the new door goes up, since a new door on a bad frame won’t run right.
- 4
Setting the new door, track, and springs. The new door goes in, the track is set and leveled, and the springs are sized and balanced for the door’s exact weight. This is the step that decides whether the door opens smoothly for the next decade, and it’s where we spend the most time.
- 5
Connecting the opener and running the final cycle test. We connect or replace the opener, set the travel limits, and test the safety reverse. We cycle the door several times to confirm it’s balanced, quiet, and closing properly, then walk you through the operation before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Beverly?
A typical new door installation in Beverly runs $700 – $2,200, depending on the door size, the material, and whether the opener needs replacing at the same time. A single car door usually lands toward the lower end of that range. A wide double car door, a heavier insulated steel door, or a custom wood build moves toward the upper end. If the opener is at the end of its life and doesn’t match the new door’s weight, adding an opener installation runs $250 – $550 on top.
What affects the price: door size and weight, steel versus wood, insulation level, whether it’s a stock size or a custom build, and whether the track and springs need a full replacement or can be reused. A door that’s been hit or has a bent track may add repair work before the install. To avoid overpaying, get a written estimate that itemizes the door, the hardware, and any opener work, and be cautious of any quote that doesn’t separate them. Our free estimate includes the measurement, the material walk-through, and a written price that holds. The price is quoted and agreed before any work starts, so you won’t see an invoice bigger than the quote.
Garage Door Installation Near Beverly – Our Service Area
We serve homeowners across Beverly and the surrounding neighborhoods, including Hegewisch, Morgan Park, South Shore, Mount Greenwood, Evergreen Park, Blue Island, Ashburn, Hometown, Riverdale, Alsip, and Thornton. Installation is a scheduled job, so we confirm your appointment when you book. For repair calls in these areas, we offer same-day service and fast dispatch from 7am to 7pm, Sunday through Friday. If you’re nearby and looking at a similar project, our garage door installation page covers what to expect. We also handle garage door repair and garage door spring repair for doors that can be saved rather than replaced.
Serving Beverly, IL – Our Local Coverage Area
We serve Beverly and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Beverly
Garage door installation is the full replacement of a garage door, including the door itself, its track, and its springs, plus connecting the opener. It’s different from a repair, which fixes one component on an existing door. We measure the opening, order the door to size, remove the old door, and set the new system so it runs balanced and smooth. If only a panel or a spring is bad, we’ll tell you that a repair makes more sense.
A standard single or double door installation usually takes a few hours on install day, once the door has arrived. The bigger variable is the lead time for ordering the door: stock sizes come in faster than custom builds, which can take longer. We confirm the timeline when you approve the written estimate, so you know both the install date and the day’s work. Call (888) 762-7611 for an exact quote – estimates are free.
A new door installation in Beverly typically runs $700 – $2,200, depending on size, material, and whether the opener needs replacing. Single car doors sit toward the lower end, while wide double doors, insulated steel, or custom wood builds move higher. Adding a new opener runs $250 – $550. The written estimate sets the final price. Call (888) 762-7611 for an exact quote – estimates are free.
Yes, we work with Clopay, Amarr, Wayne Dalton, and Craftsman doors, along with the other major residential brands. We know each brand’s construction and hardware patterns, so we can match a new door to your opening and your existing setup. If you have a brand we haven’t confirmed, tell us the make and model and we’ll let you know. Call (888) 762-7611 for an exact quote – estimates are free.
No. Installation is a measured, ordered, and scheduled job, not a same-day repair. We measure first, order the door to size, and book the install for when it arrives. Same-day service is available for repair calls on a door that’s already failing. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Warranty coverage depends on the door brand and model you choose, and it’s set by the manufacturer, not by us. We walk you through what the door’s warranty covers and what the installation itself includes before you approve the estimate. If a part fails under warranty, we can help you work through the claim. Call (888) 762-7611 for an exact quote – estimates are free.
Clear the floor of the garage on both sides of the door and move anything stored against the track or opener. Make sure we can reach the opener and the electrical outlet, and park cars outside the garage on install day. If the opener is being replaced, clear the area around it too. Everything else we handle on site. Call (888) 762-7611 for an exact quote – estimates are free.
Schedule Your Garage Door Installation Service in Beverly Today
A new door is a measured, scheduled project, and the best time to start is before the old one quits on you. Call (888) 762-7611 to book a free on-site measure and a written estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. One call covers the door, the hardware, and the opener, so you don’t need a second contractor. You’ll know the price before any work starts. Our garage door installation page covers what to expect nearby, and you can always start at Beverly Garage Door Repair Pros, or book garage door installation with us directly. You can also reach us for garage door opener repair if your opener won’t pair with the new door.
Written by the team at Beverly Garage Door Repair Pros.