Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Beverly?
New garage door installation in Beverly typically costs $700 – $2,200 for the door, hardware, and standard single-door installation, with most single-car doors landing in the $700 – $1,200 range and most double-car doors in the $1,400 – $2,200 range. That estimate covers the door, tracks, springs, rollers, and the labor to hang and balance it. Openers are usually priced separately at $250 – $550 installed, and the written estimate you get on site sets the final price.
Most installations are done in a single visit once the door is on hand. We work on garage doors only, so everything from the first measurement to the last adjustment is handled by the same specialist team. Call (888) 762-7611 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Installation Cost Breakdown (2026)
The table below shows the typical estimated ranges for a residential installation in Beverly. These are ballpark figures for 2026, not a quote. Your written estimate is the number that holds.
| Line item | Typical estimated range |
|---|---|
| New door installation, single-car (door, tracks, springs, hardware, labor) | $700 – $1,200 |
| New door installation, double-car (door, tracks, springs, hardware, labor) | $1,400 – $2,200 |
| Full installation range (all sizes, all styles) | $700 – $2,200 |
| Opener installation (unit and wiring) | $250 – $550 |
| Opener repair (existing unit) | $120 – $320 |
| Panel replacement (single damaged section) | $250 – $500 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| General garage door repair (mixed parts and labor) | $150 – $600 |
Springs are the most dangerous component in your garage door system, and we treat them differently. A spring repair price is for one spring. A matched pair is almost always replaced together because both springs in a pair have cycled the same number of times, so a pair costs about twice that range. We never quote one range for both.
What pushes the total up: the door size and material, whether insulation is included, the number of windows, whether a new opener is added, and whether the old door and tracks need to come down first. What keeps it down: a standard-size single door in a steel or aluminum profile, keeping the existing opener if it’s in good shape, and choosing a door that ships from local stock instead of one that has to be ordered.
For comparison, a repair sometimes makes more sense than a replacement. Panel replacement runs $250 – $500, track realignment $120 – $240, and roller replacement $110 – $220. When a door is otherwise sound and needs one or two parts, repair is the cheaper path. When the frame is bent, the panels are dented across several sections, or the door is well past the point of worth fixing, replacement is the answer. Our garage door installation page walks through the door styles and materials we work with.
What Affects Garage Door Installation Pricing in Beverly
Every house is a little different, and the estimate reflects it. Here are the factors that move the price the most.
- Door size. A single-car door and a double-car door are not the same job. Double doors use heavier panels, longer torsion springs, and more hardware, which is why they sit at the top of the $700 – $2,200 range.
- Door material and style. Steel, aluminum, and composite are the common choices in Beverly’s mix of older and newer homes. Windows, decorative hardware, carriage-house styling, and insulation all add cost. A plain steel door keeps the estimate low; a windowed, insulated, carriage-style door takes it higher.
- Old door removal. Taking down an existing door and its tracks is part of the labor. If the old door is a heavy wood or fully insulated model, disposal and removal take more time.
- Garage structure and clearance. Low headroom, a shallow ceiling, or an irregular opening can require special low-headroom track. Beverly’s older housing stock sometimes has a garage that was built before standard door heights settled in, and those openings need measuring before we order anything.
- Opener condition. If the existing opener is working and compatible with the new door’s weight, it can often be reused. If it’s an older unit that can’t handle the new door, we’ll quote opener installation at $250 – $550. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems daily, so we can tell you right away whether the old unit is up to the job.
- Season and weather. Beverly winters are hard on doors and springs, and the cold months are when a lot of doors fail. Spring replacements and repair calls run heavier in the colder season. Scheduling a replacement before the cold sets in usually means a smoother install and a door that closes properly through the winter.
None of those factors is a mystery once a technician is on site. Our technicians have up to 11 years of experience, and they measure the opening, check the headroom, and look at the opener before quoting anything.
How to Save on Garage Door Installation in Beverly
You can’t always bring the price down, but there are practical choices that keep the estimate on the lower end without cutting quality.
- Reuse what’s still good. A working opener, intact tracks, and smooth rollers don’t need to be replaced just because the door is. Keeping those parts can save you real money on the final estimate.
- Choose a stock door profile. A standard-size door in a common steel profile is almost always cheaper than a custom-order door. Check what’s available before you fall for a styled panel that has to be built to order.
- Fix a repairable panel instead of replacing the whole door. If the door structure is sound and the damage is limited to one section, panel replacement at $250 – $500 beats a full installation.
- Bundle a door and opener in one visit. If the door is at the end of its life and the opener is too, having both done together means one appointment and one labor charge instead of two.
- Get a free estimate before you commit. A written estimate tells you what the actual number is, not a guess. Call (888) 762-7611 and we’ll set up a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
One thing we won’t do is cut corners on safety. Springs and cables are under extreme tension, and a door that’s not properly balanced can fail dangerously. Springs, cables, and door balancing are jobs for a trained professional, not a weekend project. A correctly installed door on properly tensioned springs is also the cheapest door to own, because it doesn’t chew through rollers and openers.
What Does a Typical Garage Door Installation in Beverly Involve?
Here’s how a typical installation goes, so you know what you’re paying for.
- Measure and inspect. We check the opening width and height, the headroom above the door, the side clearance, and the condition of the framing. This is where most surprises get caught, before the door is ordered.
- Order the door and confirm the opener. We match the door to your opening and to the weight your opener can handle. If the opener is a legacy Craftsman or Genie unit, or a newer LiftMaster or Chamberlain smart system, we know how it’s going to pair with a new door.
- Remove the old door and tracks. The existing door, springs, tracks, and hardware come down, then we check the framing and the floor line.
- Install the new door. Tracks go up, panels are hung, torsion or extension springs are set, rollers and hinges are installed, and the opener is mounted and wired if it’s new.
- Balance and test. The door is balanced so it moves smoothly by hand. The opener’s travel limits and force settings are set. Safety features are tested so the door reverses properly. We don’t leave until the door opens and closes cleanly.
Most jobs are done in a day once the door is on hand. The thing that usually stretches the timeline is a custom-order door, which can take longer to arrive. A stock door goes faster. If your door has failed and you need it back in service sooner, we can walk you through repair or interim options while a replacement is arranged. Call (888) 762-7611 and we’ll book you in.
Garage Door Installation vs. Repair: Which Costs Less?
Repair is almost always cheaper up front. If a single part has failed and the door is otherwise sound, repair at $150 – $600 for general repair, or a specific fix like spring repair at $180 – $340 per spring or cable repair at $130 – $250, beats a new door. Replacement makes sense when the door is structurally compromised, when several panels are damaged, when the frame is bent, or when an older door is costing you a repair every season. A new installation at $700 – $2,200 is a bigger single payment, but it resets the clock on the whole system.
We handle both, so we’re not going to push a replacement when a repair will do. If a repair brings a door back in service for years, that’s the answer. If the door is at the end of its life, we’ll show you the numbers side by side. Either way, you get a free estimate and a written price. Call (888) 762-7611.
Can You Install a Garage Door on an Older Beverly Home?
Yes, and older homes are a big part of what we see in Beverly. Garages built decades ago often have lower headroom, narrower openings, or framing that isn’t square. We measure carefully and, where needed, use low-headroom track and hardware to fit the opening without changing the look of the house. We also supply and fit doors to match older architecture, including carriage-style profiles. If your garage was built before standard door heights settled in, we’ll tell you what fits before you order. A professional measurement up front is the cheapest step in the whole job.
FAQs – Garage Door Installation Cost
How much does garage door installation cost in Beverly?
Garage door installation in Beverly typically costs $700 – $2,200, with standard single doors in the $700 – $1,200 range and double doors in the $1,400 – $2,200 range. Opener installation, if you need a new one, runs $250 – $550. The written estimate sets the final price. Call (888) 762-7611 for a free estimate. Estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is cheaper when one or two parts have failed. Spring repair at $180 – $340 per spring, cable repair at $130 – $250, or panel replacement at $250 – $500 costs less than a new door. A full replacement at $700 – $2,200 makes sense when the door is structurally damaged or needs constant repair. Call (888) 762-7611 and we’ll give you both numbers.
How much does garage door opener installation cost in Beverly?
Opener installation typically costs $250 – $550 installed, depending on the unit and how much wiring the garage needs. If your existing opener only needs fixing, opener repair runs $120 – $320, which is usually the cheaper route. Call (888) 762-7611 for a free estimate on either.
Can you come today to quote a new garage door in Beverly?
We offer same-day service and can often get a technician out the same day to measure and quote. Call (888) 762-7611. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
What brands of garage doors and openers do you work with?
We work with eight of the most widely installed residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That covers both modern smart openers and older standalone units, so we can diagnose by brand rather than by guesswork. Call (888) 762-7611 to talk through your situation.
One Call, Full Scope
Whether you need a repair, a new opener, a replacement panel, or a full new door, Beverly Garage Door Repair Pros handles the whole scope. We’re a Beverly Garage Door Repair Pros specialist that sticks to doors, so every technician’s experience is in this trade and nothing else. Genuine parts are on hand for common fixes, which shortens the wait compared to ordering every component fresh. If your door has failed and you need it back in service today, call us. If you’re planning a replacement and want to compare door styles and prices, call us for a free estimate. The written estimate sets the final price, and there are no surprises after.
Call (888) 762-7611 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Beverly Garage Door Repair Pros.
Pricing reflects the Beverly market as of 2026. Beverly Garage Door Repair Pros offers free estimates – call (888) 762-7611.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Neil Vaughn"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Daniela Vargas"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Michael Parker