Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Beverly?
Spring repair in Beverly typically costs $180 – $340 for a single spring, and most two-spring doors need a matched pair, which runs about twice that range. The price depends on spring type, door weight, and how the door is built. Every job ends with a written estimate that sets the final price before any work starts.
If your door went slack this morning or you heard a sharp bang from the garage, that’s usually a torsion or extension spring giving out. Call (888) 762-7611. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually land for homeowners in Beverly. These are typical estimated ranges for the local market, not a quote for your specific door.
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (often needed with a spring failure) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement | $250 – $500 |
| General garage door repair | $150 – $600 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| New door installation | $700 – $2,200 |
A spring job rarely happens in isolation. When one spring snaps, the other one on a matched pair is already at the same wear point and usually has the same amount of life left in it. Replacing both together costs more upfront than one spring, but it spares you a second visit and a second bill a few months down the line. If your door is old enough that the springs have both cycled past their service life, that’s the moment to have both looked at.
Cables are the other common add-on. A snapped spring lets the door drop hard, and that sudden weight can fray or kink a cable. We inspect both cables and the drums before we quote, so you see the full picture in one estimate rather than discovering a cable issue after the springs are already fixed.
What Affects Spring Replacement Pricing in Beverly
Two homes on the same block can see different prices for the same symptom. Here’s what moves the number up or down.
- Spring type. Torsion springs, mounted on the header above the door, cost more to replace than extension springs that run along the sides. Torsion springs carry higher tension and take more care, which is part of why the labor is higher.
- Number of springs. A single-spring door sits at the low end of the range. Double doors with a matched pair of torsion springs land near twice the single-spring price.
- Door weight and size. A double-wide insulated door needs heavier springs than a single-car door, and heavier springs cost more. Door material matters here too: a steel Clopay or Amarr door weighs differently than a wood or Wayne Dalton model, and the springs are chosen to match.
- Garage ceiling height. Low-headroom garages and garages with obstructions near the spring line take longer to work around, which shows up in the labor portion of the estimate.
- Condition of surrounding parts. Worn cables, bent tracks, or a drum that’s out of true add to the job. See the spring replacement page for how we handle the full repair scope when more than the spring is involved.
- Brand and age of the door. Parts compatibility matters. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors daily, so we know what fits and what doesn’t without ordering blind.
One note on brand: a spring doesn’t care what brand is stamped on your door, but the rest of the system does. The spring is sized to the door’s weight and the lift mechanism’s geometry, and getting that sizing right is the difference between a repair that lasts and one that doesn’t. That’s why the technician checks the door, not just the broken part.
How to Save on Spring Replacement
There’s no way around the parts cost, but there are a few ways to keep the total sensible.
- Replace matched springs together. Paying for a pair once beats paying for one spring now and another in six months. The labor is shared on a single visit, so the second spring costs less than a standalone call.
- Fix cables and rollers while the technician is there. If a cable is already showing wear, adding it to the same job saves you a return visit and a separate diagnostic. It’s the same principle as replacing both springs.
- Ask for a written estimate before work starts. Ours is free, and it sets the final price. You’ll know what’s being replaced and what it costs before anyone touches the door.
- Don’t wait for a second failure. A door with one working spring is running at half its designed lift, which strains the opener and the cables. Catching it early often keeps the repair to springs only.
- Keep the door balanced. A door that’s been lubricated and adjusted runs with less stress on the springs. It’s cheap maintenance that extends the life of the parts you’re paying for.
If you want to know what your door actually needs, call (888) 762-7611 for a free estimate. We’ll look at the full system and give you a straight number.
Why Spring Replacement Is a Specialist’s Job
A garage door spring holds the weight of the door under tension. When it’s wound, it stores enough force to move a 400-pound door, and that force doesn’t care who’s standing near it. This is the single most dangerous repair in the garage door trade, which is why some general handymen won’t touch it or hand it off to someone else.
We treat spring repair as a core service, not an upsell. Our technicians have up to 11 years of experience, and every hour of it is spent on garage doors, not split across plumbing, HVAC, or general contracting. We work on the eight brands that cover the vast majority of residential installations, and we diagnose by brand logic first: what’s on the door, how it’s built, what tends to fail on that model. That’s a faster, more accurate path to the right fix than trial and error.
We also stock and supply genuine garage door parts, so common components don’t sit on a backorder list while your door stays stuck open or closed. And because we handle everything from a broken spring to a full new installation, there’s no handoff to a second contractor if the repair turns into a replacement.
If you’re comparing options or just want to understand the trade-offs, our Beverly Garage Door Repair Pros page lays out the full range of services.
Repair or Replace: What Makes Sense for Your Door?
Spring replacement is almost always the right call if the door itself is in good shape. The spring is a wear part, like brake pads on a car. It’s designed to be replaced, and a new spring on a sound door gives you years of service.
Replacement starts to make sense when the door has other problems stacked on top: cracked panels, a frame that’s rusted through, or a door so old that parts are hard to source. A new door installation typically runs $700 – $2,200 in Beverly, so the math is straightforward. If a spring job plus panel work plus track repair starts to approach the cost of a new door, it’s worth asking whether you’re putting money into a door that’s near the end of its life.
We’ll tell you honestly which side of that line your door is on. That’s a conversation, not a sales pitch, and it’s free.
What Happens When You Call
When you call (888) 762-7611, we ask a few questions about the door: what it’s doing, what brand it is, and whether it’s stuck open or closed. That tells us what to expect and lets us give you a realistic window. We answer 24/7, and dispatch runs Sunday through Friday, 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
On site, the technician inspects the springs, cables, rollers, tracks, and the balance of the door. You get a written estimate before anything is replaced. If the door can be back in service the same day with parts we carry, it usually is. If a less common part is needed, we tell you the timeline upfront rather than leaving you guessing.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Beverly?
Spring repair in Beverly typically costs $180 – $340 for one spring, and a matched pair runs about twice that. The written estimate sets the final price after the technician inspects your door. Call (888) 762-7611 for a free estimate.
Should I replace one spring or both?
Replace both if they were installed at the same time. A matched pair wears at the same rate, so when one fails the other is usually close behind. Replacing one now and one later costs more in total than doing both in a single visit. Call (888) 762-7611 to have your door looked at.
Is it cheaper to repair the spring or replace the whole door?
Repair is cheaper in almost every case, at $180 – $340 for a spring versus $700 – $2,200 for a new door. Replacement only makes sense when the door has structural problems beyond the spring, like cracked panels or a rusted frame. Call (888) 762-7611 and we’ll help you sort out which situation you’re in.
Can you fix a broken spring the same day?
Often, yes. Common spring sizes are the parts we stock, so a standard residential spring can usually be replaced in one visit. Call (888) 762-7611. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Does a broken spring damage other parts of the door?
It can. A snapped spring lets the door drop hard, which can fray a cable or bend a track. Cable repair runs $130 – $250 and track realignment runs $120 – $240, and the technician checks both before quoting so you’re not surprised later. Call (888) 762-7611 for a free estimate.
Get a Free Spring Replacement Estimate in Beverly
If your garage door is stuck, sagging, or just making a noise it didn’t make last week, the spring is the first thing to check. We’ll come out, look at the whole system, and give you a written estimate at no cost. One specialist handles the diagnosis, the parts, and the repair. Call (888) 762-7611. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Beverly Garage Door Repair Pros.
Pricing reflects the Beverly market as of 2026. Beverly Garage Door Repair Pros offers free estimates – call (888) 762-7611.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Neil Vaughn"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Daniela Vargas"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Michael Parker